Edit Aircraft

Basic Information

Unit System

Metric Imperial

Toggle to switch between metric and imperial measurements. Data is stored in metric units.

Training Configuration

Configure for Training

Enable to generate training configuration (Pilot L: 105kg, Pilot R: 90kg, Baggage: 4kg, Full fuel)

Creates a PDF with Mass & Balance sheet and Performance data for training configuration

Aircraft Type Code *

Short code used in dropdowns (e.g., C152, C172)

Aircraft type code is required.

Aircraft Name *

Full aircraft name (e.g., Cessna 152)

Aircraft name is required.

Mass & Balance Data

Empty Weight (kg)

Empty Weight Moment Arm (m)

Max Takeoff Weight (kg)

Max Landing Weight (kg)

Pilot Seat Moment Arm (m)

Passenger Seat Moment Arm (m)

Baggage Moment Arm (m)

Fuel Moment Arm (m)

Max Fuel Capacity (L)

CG Limits (JSON array)

Define weight-dependent CG envelope as JSON array

Performance Data

Cruise Speed (kts)

Stall Speed (kts)

Climb Rate (ft/min)

Takeoff Distance (m)

Ground roll at sea level, ISA

Landing Distance (m)

Ground roll at sea level, ISA

Service Ceiling (ft)

Fuel Consumption (L/hr)

At cruise power setting

Range (nm)

With standard fuel reserves

Endurance (hours)

Performance Notes

Cancel

Configured Aircraft

C140

Cessna 140

C152

Cessna 152

C150L

Cessna FRA150L

About Aircraft Configuration

Aircraft configurations store all necessary data for Mass & Balance calculations and Performance tables. This data can be referenced when creating flight dockets.